The double-breasted suit coat appears in the current gallery with coordinated tailoring and a dark high-neck layer. The coat itself is the named product; the photo does not prove that trousers or the inner top come with it. Before planning a complete suit, confirm the included pieces. For the coat, the useful published facts are its 70% polyester/30% wool composition and M–XL chart for shoulder, chest, sleeve and total length. Those dimensions help assess an outfit over a shirt or fine knit without inferring warmth or drape from a photo.

Start with coat length, then the layer underneath

The listed lengths are 112 cm for M, 114 cm for L and 116 cm for XL. Compare those figures with a coat you own, measured from the same point if the seller confirms the chart’s endpoints. A 2 cm size step changes the hem slightly; it will not automatically produce the same near-knee or below-knee placement shown on the model at a different height. Try your reference coat with the trousers and shoes you expect to wear, and mark where its hem falls when standing and seated. Ask MAXCT whether the listed length is measured from the shoulder, collar or another point.

For layering, the source lists chest 120/124/128 cm, shoulder 52/53.5/55 cm and sleeve 63/64/65 cm for M/L/XL. Moving from M to L adds 4 cm at the chest, 1.5 cm at the shoulder, 1 cm at the sleeve and 2 cm at the length. If your reference coat is comfortable over a dress shirt but tight over a blazer, record which dimension binds before sizing up. The chart has no armhole, bicep or closed-button waist measurement, so a larger chest number alone cannot establish room for a jacket underneath.

Compare the coat you own in the closed position

Button your reference coat over the intended layer. Note chest ease when reaching forward and where the lapels and buttons sit. Measure its shoulder span, chest circumference, sleeve reach and full length; keep a note of whether you measured flat and doubled a width. The MAXCT source says its measurements were taken flat with about 1–3 cm manual variation, but does not specify how the chest figure is expressed. Ask for the measuring convention before comparing a flat width with the published 120–128 cm values. If a closed coat pulls at the waist, request the buttoned-waist or hem circumference because the chart does not give it.

Know what the material line can and cannot say

The product name includes “wool,” yet the source specifies 30% wool and 70% polyester. That is a blend, not an all-wool coat. No lining, fabric weight, weather rating or cleaning instruction is provided, so the percentages cannot establish insulation or care on their own. The gallery supports a grey tailored appearance and the selector offers Black and Grey, but screens can differ in tone. If you want the coat to match trousers, request fabric or color confirmation rather than assuming the pictured trousers are an included or matching item. Choose a size after the closed-layer and length checks, then confirm the parcel contents separately.